3M Reflective Tape 823i

• Roll width: 5 mm, 10 mm, 25 mm, 50 mm, 100 mm
• Reflectivity class: RA2/C
• Colours: white (823i-10), yellow (823i-11), red (823i-12), blue (823i-15)
• Film thickness: 0.13 mm

Please note:
The tape will be delivered in one piece to a max. roll length of 10 m. If you order more than 10 m, you will receive several rolls. 5 mm and 10 mm tapes are only available on 10 metre rolls.

3M™ Reflective Tape 823i – Repositionable and Bubble-Free Application

3M™ Reflective Tape 823i combines great reflectivity with exceptional user-friendliness. Thanks to its Controltac™ technology the tape can be applied and repositioned if needed. The adhesive has minimal initial contact with the substrate which allows re-application until pressed down. Comply™ guarantees bubble-free application due to air release channels in the film.

Product features of 3M™ 823i:

• highly reflective
• thin and flexible design
• suitable for curved surfaces
• Controltac™ technology makes the film repositionable
• Comply™ technology vents trapped air through microchannels
• no edge-sealing required
• service life: 3 years

The manufacturer's logo is printed inside the master roll at wide intervals. Therefore, some reflective tapes, which are cut from the master roll, may not show the logo or the name of the manufacturer. You can ascertain the film's authenticity by comparing its surface structure with the photo shown above.

For more information, please refer to the provided data sheet.