Avery Conspicuity Tape V-6700 B

For marking the contours of lorries and trailers/semi-trailers with rigid superstructures in accordance with regulation ECE R 104

Roll width: 50 mm
Roll lengths: 5 m, 10 m, 25 m or 50 m
Colours: White (V-6700), yellow (V-6701), red (V-6702)
Design: for rigid superstructures
Reflectivity class: RA3/C 
Film thickness: max. 0.33 mm
Standards: according to ECE 104 class C

Features and benefits of Avery V-6700 B contour markings

• No edge sealing necessary
• Can also be applied in cold weather, minimum application temperature: 0° C
• Application temperature: - 30° C to + 70° C
• Suitable for metallic and painted substrates
• Initial repositionability simplifies bonding
• Shelf life: 10 years
• E-marking

Cleaning instructions:
The first cleaning should only take place 72 days after application of the contour marking
Do not use abrasive cleaners!
Can be pressure washed in accordance with the following parameters:
- Maximum pressure: 80 bar. 
- Maximum washing temperature: 60°C
- The water jet must have a minimum distance of 30 cm to the contour marking.
- The water jet must be directed at an angle of 90° (+/- 45°) to the surface.
- The cleaning solution should have a pH value of 3-11. Observe the dilution ratios according to the manufacturer's recommendations
- Rinse thoroughly, do not leave the cleaning solution on or around the contour marking for longer than 60 seconds

For further processing and cleaning instructions, please refer to the data sheets.